BLMBX - 10 5202 GLOSS OIL HOUSE TINT BASE
- MSDS: BLMBX
- Manufacturer: VALSPAR CORP
- Product Name: 10 5202 GLOSS OIL HOUSE TINT BASE
- National Stock Number: 8010-00N020325
Product Identification
Product ID:10 5202 GLOSS OIL HOUSE TINT BASE
MSDS Date:11/23/1987
FSC:8010
NIIN:00N020325
MSDS Number: BLMBX
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
VM&P NAPHTHA (LIGROINE)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 30%
OSHA PEL 300 PPM/400 STEL
ACGIH TLV: 300 PPM; 9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 15 - 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF INHALED. MAY AFFECT
BRAIN/ NERV SYS/RESP SYS, CAUSING DIZZ/HDCH/NAUSEA/RESP IRRIT.
PROLONGED INHALATION OF DUSTS MAY RESULT IN SHORTNESS OF BREATH.
OVEREXPOSURE TO INGREDIENTS IN THI S PROD MAY CAUSE NOSE & THROAT
IRRIT/EYE IRRIT/SKIN IRRIT. CHRONIC: NOTICE: REPORTS HAVE ASSOC
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHAL: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL
ATTENTION. EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH
WITH SOAP AND WATER . INGEST: GET MD IMMEDIATELY .
Fire Fighting
Flash Point Method:TCC
Flash Point:110F,43C
Lower Limits:0.90 %
Upper Limits:21.10 %
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:FIRE FIGHTERS MUST WEAR NIOSH/MSHA APPRVD
SCBA/AIR MASK AND FULL PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO
FIRE SHOULD BE KEPT COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:CNTNS OXIDIZING MATLS. CONTAM RAGS,
WIPES, SAWDUST/ETC MAY CATCH FIRE SPONTANEOUSLY. STORE WASTE UNDER
H2O IN CLSD METAL CTNR UNTIL DISPOSED OF IN (SUPP DATA)
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA OR AIRMASK FOR LARGE SPILLS IN A CONFINED
AREA. WIPE UP OR ABSORB ON SUITABLE MATERIAL AND SHOVEL UP. AVOID
CONTACT WITH EYES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPARKS/OPEN
FLAMES. KEEP CNTNR CLOSED WHEN NOT IN USE. DO NOT STORE >120F.
STORAGE SHOULD BE PROVIDED I/A/W OSHA REG 1910.106.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE,
INCLUDING FLAMMABLE OR EXPLOSIVE VAPORS. DO NOT CUT, PUNCTURE OR
WELD ON OR NEAR CONTAINER. ALL LABEL WARNINGS MUST BE OBSERVED
UNTIL THE CONTAINER HAS BE EN CLEANED OR RECONDITIONED. (SUPP DATA)
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIR ECTIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA. VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:USUAL HAND PROT FOR PAINT APPLICATION.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: COMPLIANCE WITH ALL APPLICABLE REGS. OTHER PREC: NOTICE:
REPORTS HAVE ASSOCIATED REPEATED & PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. INT ENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:2.4 @ 68 F
Vapor Density:5.05
Spec Gravity:1.19
Evaporation Rate & Reference:0.08 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:45.07
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON DIOXIDE/MONOXIDE AND METAL
OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.